Main problems:
1) During printing, red indicator light is on.
2) During printing, ink wire always crushes with two sides of printer body.
3) Not well stick the wire rack.
Settlement:
The ink wire length can't be too long, adjust it to the right size.
・If ink wire is too long, it will crush the printer body during printing. During printing, pull
out power wire, use hand to move cartridge holder to the right and then to the left, adjust
wire length.
・If ink wire is too short, it will also cause red indicator light flashing during printing, you
also need adjust length according above step.
・Ink wire crushing with printer body always happen on Epson printer
780/790/810/820/830/C61 etc., the upside body of these printer is in arc shape. If use
softer or lighter wire, this problem can be reduced, but it will cause ink blocked problem.
Our ink wire is up to the need of continuous inking system, if you well install the system, it
can work well.
・If you can't well fix the rack, just please change with new sponge sticker.
FOR MORE INFORMATION PLEASE SEE OUR WEBSITE: WWW.MIR-AUS.COM
HI
ReplyDelete