CISS Ink Problems

Main problem:

1) When print test pages, you find line missing on one colour or several colour, but other

Colours are ok, even after do many cleaning, things keep the same.

2) During printing, you always find wire blocked, printer head blocked or line missing for

some colours (most time is the same colour).

3) Print output is much difference from original picture.

4) When print photos, the performance is without high resolution and brilliancy.

5) You can find sediment in the ink of external ink tank.

Settlement:

Above said is resulted from ink quality, suggest you to use our brand ink. Now there are a

lot of ink manufacturer, but the quality is much difference. After our test, only a few brand

ink is with stable quality, and even less with equal quality to Epson original ink. General

Speaking, the ink for continuous inking system should be better than for compatible

Cartridges and the ink for compatible cartridges will be better than some bulk packed refill

Ink.

Our ink is made according to our own formula; the performance is vivid with high

Resolution, and the character is very good for our continuous inking system.

If you just purchase empty system from us, and use your own ink, you should do some

main test on your ink as following:

1. Ink will not block all wires during six month

2. There is no ink sediment during three month.

3. There is no ink dry piece and block printer head in one month.

4. There is no serious line or colour missing in 15 days.

5. There is no line missing at next days in five days.

6. After installation finished, the cleaning times will not over three (including natural

Cleaning)

7. When printing, just light colour declination, but black colour is good.

FOR MORE INFORMATION PLEASE SEE OUR WEBSITE: WWW.MIR-AUS.COM