Friday, August 14, 2009

CISS Lubricating problem:

Main problems:

1) During cartridge holder moving, it crush the left and right side of printer, and make

special noise.

2) Paper insert button is not work and can't insert new paper.

3) Paper insert indicator light is flashing and shows Signal Error.

4) Printing place is not right and to the left.

Settlement:

These problems main happen on Epson printer 700/780/1200, resulted from the bounce

of cartridge holder belt, when you lubricate the cartridge holder rail, these problems can

be settled.

Use clean paper to wipe some LB-A lubricating oil on the rail, pull cartridge holder back

and forth and let the rail share lubricating oil equally (Do not spray or drop the oil to the rail

directly), then go on following steps:

When printer is on, pull out power wire, then cartridge holder .

Find out a white piece that under the black cartridge's holder.

Use tweezers to pull down(forward) this whiter piece, pull out cartridge holder from the

right.

Then push cartridge holder to the left till it can't move.

Plug on power wire.

Now cartridge holder belt will reset his place, and cartridge holder will stop at original

right side.


FOR MORE INFORMATION PLEASE SEE OUR WEBSITE: WWW.MIR-AUS.COM

No comments:

Post a Comment